Rotor fixed!

When I tilted my Tower and climbed up to check the electrical connector on the Yaesu G-1000DXC I found that the cable was in a lot of tension due to movement of all Cables. Disconnected the plug. Opened it and found one wire broken.

Re soldered all and put it all back. Changed the routing of Cables in the Tower and put a drop-loop on the rotor Cable. Cranked the Tower up and rotor works as it was supposed to do!

Wx here is calm. Temp around freezing and no snow. But prediction is more Heavy winds and a lot of snow on the way. Hope all remaining trees will stand tall!!

CUL